{"title":"LCDs \u0026 Displays","description":"\u003cp\u003eBrowse our LCDs \u0026amp; Displays collection. New Arrival.\u003c\/p\u003e","products":[{"product_id":"43-40-pin-tft-display-480-x-272-with-touchscreen","title":"4.3\" 40-pin TFT Display - 480 x 272 with Touchscreen","description":"\u003cp\u003eThis 4.3\" TFT screen has lots of pixels, 480 x 272 to be exact, an LED backlight and a resistive touchscreen overlay. It's great for when you need a lot of space for graphics or a user interface. These screens are commonly seen in consumer electronics, such as miniature TVs, GPSs, handheld games car displays, etc. A 40-pin connector has 8 red, 8 green, and 8 blue parallel pins, for 24-bit colour capability.\u003c\/p\u003e\n\u003cp\u003eThis is a \"raw pixel-dot-clock\" display with no SPI\/parallel type controller or any kind of RAM. The display is supposed to be constantly refreshed, at 60Hz, with a pixel clock, V sync, H sync, etc. There are some high-end processors, such as that used in the BeagleBone, that can natively support such RGB TTL displays. However, it is extremely rare for a small microcontroller to support it, as you need dedicated hardware or a very fast processor such as an FPGA. Not only that, but the backlight requires a constant-current mode boost converter that can go as high as 24V instead of our other small displays that can run the backlight off of 5V\u003c\/p\u003e\n\u003cp\u003eFor that reason, we are carrying it only as a companion to the Adafruit RA8875 driver board in the store, which is a chip that can handle the huge video RAM and timing requirements, all in the background. That's the best way to interface this display to just about any microcontroller (including Arduino \u0026amp; friends) If you are an advanced electronics enthusiast you can try wiring this directly to your processor, but we don't have any support or tutorials for that purpose.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 67mm x 105.6mm x 4.3mm\u003c\/li\u003e\n\u003cli\u003eWeight: 65g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCH430WQ12A-T display datasheet\u003c\/li\u003e\n\u003cli\u003eCH430WQ12A-T datasheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":52217207521568,"sku":"hpv1787257234802","price":21.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/3231\/3120\/files\/43-40-pin-tft-display---480-x-272-with-touchscreen_1.jpg?v=1787257240"},{"product_id":"ra8875-driver-board-for-40-pin-tft-touch-displays-800-x-480-max","title":"RA8875 Driver Board for 40-pin TFT Touch Displays - 800 x 480 Max","description":"\u003cp\u003eHave you gazed longingly at large TFT displays - you know what I'm talking about here, 4\", 5\" or 7\" TFTs with up to 800 x 480 pixels. Then you look at your Arduino. You love your Arduino (you really do!) but there's no way it can control a display like that, one that requires 60Hz refresh and 4 MHz pixel clocking. Heck, it doesn't even have enough pins. I suppose you could move to ARM core processors with TTL display drivers built in but you've already got all these shields working and anyway you like the small micros you've got.\u003c\/p\u003e\n\u003cp\u003eWhat if I told you there was a driver chip that could fulfil those longings? A chip that can control up to 800 x 480 displays, and heck, a resistive touchscreen as well. All you need to give up is 5 or so SPI pins. Would you even believe me? Well, sit down because this product may shock you.\u003c\/p\u003e\n\u003cp\u003eThe RA8875 is a powerful TFT driver chip. It is a perfect match for any chip that wants to draw on a big TFT screen but doesn't quite have the oomph (whether it be hardware or speed). Inside is 768KB of RAM, so it can buffer the display (and depending on the screen size also have double overlaying). The interface is SPI with a very basic register read\/write method of communication (no strange and convoluted packets). The chip has a range of hardware-accelerated shapes such as lines, rectangles, triangles, ellipses, built-in and round-rects. There is also a built-in English\/European font set (see the datasheet section 7-4-1 for the font table) This makes it possible to draw fast even over SPI.\u003c\/p\u003e\n\u003cp\u003eThe RA8875 can also handle standard 4-wire resistive touchscreens over the same SPI interface to save you pins. There's an IRQ pin that you can use to help manage touch interrupts. The touchscreen handler isn't the most precise driver we've used, so we broke out the X\/Y pins so you can connect them up to something like the STMPE610 which is a very classy touchscreen controller.\u003c\/p\u003e\n\u003cp\u003eOn the PCB we have the main chip, level shifting so you can use it safely with 3-5V logic. There is also a 3V regulator to provide clean power to the chip and the display. For the backlight, we put a constant-current booster that can provide 25mA or 50mA at up to 24V. The connector to the screen is a classic '40 pin' connector. All the 40-pin TFT's in the Adafruit shop are known to work well. There are other 40-pin displays that have different pinouts or backlight management and these may not work - they may even damage the driver or TFT if the boost converter pushes 24V into the display logic pins! For that reason, we only recommend the displays we've tested and sell here.\u003c\/p\u003e\n\u003cp\u003eEach order comes with an assembled, tested RA8875 breakout and a stick of header. You'll also need to purchase a 40-pin TFT screen. We currently have 4.3\", 5.0\" and 7.0\" screens available.\u003c\/p\u003e\n\u003cp\u003eTo get you started we've written a graphics library that handles the basic interfacing, drawing and reading functions. Download the Adafruit RA8875 library from github and install it as described in our tutorial. Connect a 40-pin TFT to the FPC port and wire up the SPI interface to an Arduino as described in the example code. Once started you'll be able to see the graphic\/text demo and then touch the screen to 'paint'. For more advanced details on what the RA8875 can do (and it can do a lot) check the datasheet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: The RA8875 does not tri-state the MISO pin, it should not share that pin with any other SPI device (including an SD card reader) without the use of a 74HC125 or similar\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eRevision History\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs of August 5, 2024 –\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eWe updated this board with a tristate circuit on MISO and a new backlight driver chip. It's also been updated with \u003cstrong\u003eAdafruit Pinguin\u003c\/strong\u003e to make a lovely and legible silkscreen. It is otherwise electrically and mechanically compatible!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/DXvxdvjoDKg?si=2C9Ik960m6IGTkX-\u0026amp;start=121\" height=\"315\" width=\"560\" allowfullscreen=\"\" referrerpolicy=\"strict-origin-when-cross-origin\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eDimensions: 40.6mm x 48.7mm x 3.8mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFor the level shifter we use the CD74HC4050 which has a typical propagation delay of ~10ns\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003eResources\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\nRA8875 Full Datasheet\u003cspan\u003e \u003c\/span\u003e(this is v1.9 which applies to all chips with date code 1214 - 2012 14th week - or later)\u003c\/li\u003e\n\u003cli\u003ePrimary Guide\u003c\/li\u003e\n\u003cli\u003eRA8875 App note\u003c\/li\u003e\n\u003cli\u003eEagleCAD PCB files on GitHub\u003c\/li\u003e\n\u003cli\u003eRA8875 Arduino library\u003c\/li\u003e\n\u003cli\u003e\nFritzing object in Adafruit Fritzing library\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":52217207882016,"sku":"pbq1787257236084","price":26.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/3231\/3120\/files\/ra8875-driver-board-for-40-pin-tft-touch-displays---800-x-480-max_1.jpg?v=1787257241"},{"product_id":"adafruit-qualia-97-displayport-monitor-2048x1536-resolution-discontinued","title":"Adafruit Qualia 9.7\" DisplayPort Monitor - 2048x1536 Resolution [discontinued]","description":"\u003cp\u003eAdd a glorious 2048x1536 retina-blasting, ultra-high pixel density, IPS display to any computer with a Thunderbolt\/DisplayPort port. This product comes with a new 9.7\" diagonal TFT display module (the same one used in the iPad 3 \u0026amp; 4), along with our custom made driver board, a stand-up monitor enclosure kit, 10' DisplayPort cable and 9V power adapter.\u003cbr\u003e\u003cbr\u003eThe driver board is a work of art (it was designed by resident engineer KTOWN) - and 9:05)\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\u003cp\u003eDatasheets, EagleCAD PCB files, and CAD files in the tutorial\u003c\/p\u003e\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":52217207914784,"sku":"ixt1787257237296","price":147.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/3231\/3120\/files\/adafruit-qualia-97-displayport-monitor---2048x1536-resolution-discontinued_1.jpg?v=1787257242"},{"product_id":"oled-breakout-board-16-bit-color-127-wmicrosd-holder","title":"OLED Breakout Board - 16-bit Color 1.27\" w\/microSD holder","description":"\u003cp\u003eWe love our black and white monochrome displays but we also like to dabble with some color now and then. Our 1.27\" color OLED displays are perfect when you need a small display with vivid, high-contrast 16-bit color. The visible portion of the OLED measures 1.27\" diagonal and contains 128x96 RGB pixels, each one made of red, green and blue OLEDs. Each pixel can be set with 16-bits of resolution for a large range of colors. Because the display uses OLEDs, there is no backlight, and the contrast is very high (black is really black). We picked this display for its excellent color, this is the nicest mini OLED we could find!\u003cbr\u003e\u003cbr\u003eThis OLED uses the SSD1351 driver chip, which manages the display. You can talk to the driver chip using 4-wire write-only SPI (clock, data, chip select, data\/command and an optional reset pin). Included on the fully assembled breakout is the OLED display and a small boost converter (required for providing 12V to the OLED) and a microSD card holder. This design includes built-in logic level shifting so you can use it with 3-5VDC power and logic levels. Our example code shows how to read a bitmap from the uSD card and display it all via SPI.\u003cbr\u003e\u003cbr\u003eOf course, we wouldn't just leave you with a datasheet and a \"good luck!\" - we've written a full open source graphics library that can draw pixels, lines, rectangles, circles, text and bitmaps as well as example code.\u003cbr\u003e\u003cbr\u003eThe code is written for Arduino but can be easily ported to your favorite microcontroller. Check out the tutorial we have for both this and the 1.5\" version of the OLED for wiring diagram, code, and more!\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/djkzn9eSXe8?start=136\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1.27\" diagonal OLED, 16-bit color\u003c\/li\u003e\n\u003cli\u003eSPI interface\u003c\/li\u003e\n\u003cli\u003e3.3-5V logic and power\u003c\/li\u003e\n\u003cli\u003ePCB Dimensions: 35.8mm x 43mm\u003c\/li\u003e\n\u003cli\u003eScreen Dimensions: 33.8mm x 27mm\u003c\/li\u003e\n\u003cli\u003eDisplay current draw is completely dependent on your usage: each OLED LED draws current when on so the more pixels you have lit, the more current is used. They tend to draw ~30mA or so in practice but for precise numbers you must measure the current in your usage circuit. This does not include the SD card, which is separate.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct Wiki\u003c\/li\u003e\n\u003cli\u003eDatasheets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRevision History\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs of 13th March 2023\u003c\/strong\u003e - we are stocking an updated version of this board with a black PCB and an EYESPI connector to make cabling easier with an 18-pin FPC. We also used \u003cstrong\u003eAdafruit Pinguin\u003c\/strong\u003e to make a lovely silkscreen. The board is otherwise the same size, pinout, and functionality.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":52217207947552,"sku":"dwp1787257239220","price":20.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/3231\/3120\/files\/oled-breakout-board---16-bit-color-127-wmicrosd-holder_1.jpg?v=1787257243"},{"product_id":"7-display-1280x800-720p-ips-speakers-hdmivgantscpal","title":"7\" Display 1280x800 (720p) IPS + Speakers - HDMI\/VGA\/NTSC\/PAL","description":"\u003cp\u003e\u003cstrong\u003eThis 7-Inch HDMI Display combines a high-resolution screen with built-in stereo speakers and multiple video inputs, making it ideal for Raspberry Pi projects, embedded systems, portable displays, and multimedia applications. \u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eYes, this is an adorable small \u003cstrong\u003eHDMI television\u003c\/strong\u003e with incredibly \u003cstrong\u003ehigh resolution\u003c\/strong\u003e and built in \u003cstrong\u003e3W \u003c\/strong\u003estereo speakers! We tried to get the smallest possible \u003cstrong\u003eHDMI\/VGA\u003c\/strong\u003e display with high-res, high-contrast visibility. The visible display measures only\u003cstrong\u003e 7\" (17.8cm\u003c\/strong\u003e) diagonal, and the TFT comes in an enclosure with \u003cstrong\u003eHDMI\u003c\/strong\u003e, \u003cstrong\u003eVGA \u003c\/strong\u003eand \u003cstrong\u003eComposite \u003c\/strong\u003einputs. The display is very easy to use - simply connect a\u003cstrong\u003e \u003c\/strong\u003e9 to 12VDC adapter to the 2.1mm centre-positive DC jack (not included) then connect a digital video source to one of the ports. Voila, a television display!\u003c\/p\u003e\n\u003cp\u003eThere's some little buttons on the front that let you enter a menu system for adjusting brightness, colour and contrast. It auto-detects which input you have and switches to that one or you can 'select' from the menu which to display. It \u003cstrong\u003ecomes with a basic stand\u003c\/strong\u003e (shown) and there are \u003cstrong\u003efour \u003c\/strong\u003e'\u003cstrong\u003emounting thread\u003c\/strong\u003e' \u003cstrong\u003eholes \u003c\/strong\u003ein the back in a 75mmx75mm square and you can use \u003cstrong\u003eM4 \u003c\/strong\u003escrews to attach it to an enclosure. There's also a \"Camera Mount\" \u003cstrong\u003e1\/4-20 hole\u003c\/strong\u003e in the bottom so you can attach it to a camera-ready mount.\u003c\/p\u003e\n\u003cp\u003eTo demonstrate it, we took some photos with the display connected to a Raspberry Pi, but it will also work connected to any device with \u003cstrong\u003eHDMI\u003c\/strong\u003e, \u003cstrong\u003eVGA \u003c\/strong\u003eor \u003cstrong\u003eNTSC\/PAL\u003c\/strong\u003e output. It will not work with a device that only outputs DVI (without a DVI to HDMI adapter) or SECAM.\u003c\/p\u003e\n\u003cp\u003eThere's also a slot in the side for a \u003cstrong\u003eUSB \u003c\/strong\u003estick. In theory if you put some MP3's , pictures or videos on the stick and plug it in you can use the display as a viewer (but we haven't tried it). There's also an audio line-in \u003cstrong\u003e3.5mm jack\u003c\/strong\u003e, so if you want to use VGA you can pipe in audio from an external source. It doesn't work with NTSC input though! The + and - buttons on the front allow you to quickly change the speaker volume. Its not a HiFi but its fairly loud and good for movies \u0026amp; games.\u003c\/p\u003e\n\u003cp\u003eWorks great with a Raspberry Pi or a BeagleBone Black, as well as our XBox, Windows desktop and Macbook (with an HDMI adapter cable). Some OS's such as Windows may require you to set the audio output to the external display but with the XBox \u0026amp; RasPi it immediately used the speakers without any poking or prodding.\u003c\/p\u003e\n\u003cp\u003eA \u003cstrong\u003epower adapter is not included\u003c\/strong\u003e. Any 9 to 12VDC\u003cstrong\u003e \u003c\/strong\u003eadapter will work nicely: we prefer 9V DC. Video will work with 5-12V but the audio amplifier requires 9-12V so if you want the speakers to work, 9V is best. Check the technical tabs for current draw at various voltages.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/Rgso9ddjftM?si=qyFrYphBtncAwt0u\u0026amp;start=2043\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e7\" (17.8cm) diagonal TFT display with high resolution and high-contrast visibility\u003c\/li\u003e\n\u003cli\u003eBuilt-in 3W stereo speakers\u003c\/li\u003e\n\u003cli\u003eMultiple video inputs: HDMI, VGA, and Composite (NTSC\/PAL)\u003c\/li\u003e\n\u003cli\u003eAuto-detects input source or manual selection via front menu\u003c\/li\u003e\n\u003cli\u003eFront control buttons for brightness, colour and contrast adjustment\u003c\/li\u003e\n\u003cli\u003eRequires 9-12VDC power adapter (not included; 9V recommended for full audio functionality)\u003c\/li\u003e\n\u003cli\u003eIncludes basic stand with four M4 mounting thread holes (75mmx75mm square pattern)\u003c\/li\u003e\n\u003cli\u003e1\/4-20 camera mount hole on bottom for flexible mounting options\u003c\/li\u003e\n\u003cli\u003e3.5mm audio line-in jack for external audio with VGA input\u003c\/li\u003e\n\u003cli\u003eUSB port for media playback (MP3s, pictures, and videos)\u003c\/li\u003e\n\u003cli\u003eFront +\/- buttons for quick speaker volume adjustment\u003c\/li\u003e\n\u003cli\u003eCompatible with Raspberry Pi, BeagleBone Black, Xbox, Windows, and Mac devices\u003c\/li\u003e\n\u003cli\u003eDoes not work with DVI-only output (without DVI to HDMI adapter) or SECAM format\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePower with 9-12VDC\u003c\/li\u003e\n\u003cli\u003e700mA power draw at 12V\u003c\/li\u003e\n\u003cli\u003e16:10 display ratio\u003c\/li\u003e\n\u003cli\u003eResolution: 1280 x 800\u003c\/li\u003e\n\u003cli\u003eVisible area: 150mm x 95mm 16:10\u003c\/li\u003e\n\u003cli\u003eBrightness: 400cd\/m2\u003c\/li\u003e\n\u003cli\u003eContrast: 800:1\u003c\/li\u003e\n\u003cli\u003eWe opened up one of the displays and found an HSD070PWW1 inside, we expect that all of TVs have this display or something similar\u003c\/li\u003e\n\u003cli\u003eNot HDCP compatible - it cannot be used with 'secured' HDMI sources\u003c\/li\u003e\n\u003cli\u003eMax Dimensions of Display Casing: 175mm x 127mm x 32mm\u003c\/li\u003e\n\u003cli\u003eDisplay Weight: 305g\u003c\/li\u003e\n\u003cli\u003eStand Weight: 66g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAdafruit UBERGUIDE\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x 7\" Display 1280x800 (720p) IPS + Speakers - HDMI\/VGA\/NTSC\/PAL\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":52217207980320,"sku":"rrt1787257241669","price":87.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/3231\/3120\/files\/7-display-1280x800-720p-ips-speakers---hdmivgantscpal_1.jpg?v=1787257246"},{"product_id":"101-display-audio-1280x800-ips-hdmivgantscpal-discontinued","title":"10.1\" Display \u0026 Audio 1280x800 IPS - HDMI\/VGA\/NTSC\/PAL [Discontinued]","description":"\u003cp\u003eMake a lovely audio\/video setup with a 10.1\" IPS screen with HDMI stereo speaker support. For video, we have a beautiful bright 10.1\" TFT display with incredibly high resolution and great angle-visibility! We tried to get the thinnest, brightest, highest resolution display that would be good for embedded computing usage. The visible display measures 10\" diagonal and is a 'raw' display as is used in a tablet, ultra thin with some mounting tabs around the edge. We include a driver board with HDMI, VGA and Composite inputs as well as stereo 4 ohm at 3W output driving capability. The setup is very easy to use - simply connect a 9 to 12VDC adapter to the 2.1mm center-positive DC jack, then connect a digital video source to one of the ports and two 4 to 8 ohm speakers to the SPK output pins. Voila, a display!\u003cbr\u003e\u003cbr\u003eThere's a little wired PCB with little buttons that let you enter a menu system for adjusting brightness, color and contrast. It tried to auto-detect which input you have and switches to that one or you can 'select' from the menu which to display.\u003cbr\u003e\u003cbr\u003eWe include a plug-in cable that connects to the 4 speaker output pins, the pins are labeled LOUT+\/- and ROUT+\/- you'll have to solder your own speakers to the 4 wires\u003cbr\u003e\u003cbr\u003eTo demonstrate it, we took some photos with the display connected to a Raspberry Pi, but it will also work connected to any device with HDMI, VGA or NTSC\/PAL output. It will not work with a device that only outputs DVI (without a DVI to HDMI converter) or SECAM.\u003cbr\u003e\u003cbr\u003eFor use with a Raspberry Pi we suggest editing \u003cb\u003econfig.txt\u003c\/b\u003e to set the HDMI to 1280x800 in case it doesn't detect the resolution properly. You can see our suggested config.txt in the Technical details tab. The easiest way to edit the config.txt is to put the Pi SD card into an every day computer and edit config.txt with any text editor and save.\u003cbr\u003e\u003cbr\u003eFor use with a BeagleBone black, we found it works when plugged in, no configuration required.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eA power adapter is NOT included\u003c\/b\u003e. You will need to either purchase a 9 or 12VDC adapter or you can use one you've already got around the house. 17:02)\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eDriver Datasheet\u003c\/li\u003e\n\u003cli\u003eKeyboard Datasheet\u003c\/li\u003e\n\u003cli\u003ePower with 9-12VDC\u003c\/li\u003e\n\u003cli\u003e16:10 display ratio\u003c\/li\u003e\n\u003cli\u003eResolution: 1280 x 800\u003c\/li\u003e\n\u003cli\u003eVisible area: 217mm x 135mm 16:10\u003c\/li\u003e\n\u003cli\u003eBrightness: 350cd\/m2\u003c\/li\u003e\n\u003cli\u003eContrast: 800:1\u003c\/li\u003e\n\u003cli\u003eWe ship with a an HSD101PWW1 display, or equivalent\u003c\/li\u003e\n\u003cli\u003eDisplay dimensions: 230mm x 150 x 5.2 mm\u003c\/li\u003e\n\u003cli\u003eNot HDCP compatible - it cannot be used with 'secured' HDMI sources\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePower draw from combined display+HDMI driver when backlight is on\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e5V: 980mA (not guaranteed to function at 5V)\u003c\/li\u003e\n\u003cli\u003e6V: 780mA (not guaranteed to function at 6V)\u003c\/li\u003e\n\u003cli\u003e7V: 660mA\u003c\/li\u003e\n\u003cli\u003e8V: 575mA\u003c\/li\u003e\n\u003cli\u003e9V: 515mA\u003c\/li\u003e\n\u003cli\u003e10V: 450mA\u003c\/li\u003e\n\u003cli\u003e11V: 415mA\u003c\/li\u003e\n\u003cli\u003e12V: 380mA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWeight\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eScreen: 165g\u003c\/li\u003e\n\u003cli\u003eComponents: 82g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information on this HDMI display, including a suggested config.txt, check out our HDMI Display ÜBERGUIDE!\u003c\/p\u003e\n\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":52217208013088,"sku":"azc1787257242140","price":115.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/3231\/3120\/files\/101-display-audio-1280x800-ips---hdmivgantscpal-discontinued_1.jpg?v=1787257247"},{"product_id":"50-40-pin-tft-display-800-x-480-with-touchscreen","title":"5.0\" 40-pin TFT Display - 800 x 480 with Touchscreen","description":"\u003cp\u003eThis 5.0\" TFT screen has lots of pixels, 800 x 480 to be exact, an LED backlight and a resistive touchscreen overlay. It's great for when you need a lot of space for graphics or a user interface. These screens are commonly seen in consumer electronics, such as miniature TVs, GPSs, handheld games car displays, etc. A 40-pin connector has 8 red, 8 green, and 8 blue parallel pins, for 24-bit colour capability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis version has a 4-wire resistive touchscreen attached\u003c\/strong\u003e It's exactly the same TFT display as PID 1680 but with a resistive touch panel so it is a little more expensive.\u003c\/p\u003e\n\u003cp\u003eThis is a \"raw pixel-dot-clock\" display and does not have an SPI\/parallel type controller or any kind of RAM. The display is supposed to be constantly refreshed, at 60Hz, with a pixel clock, V sync, H sync, etc. There are some high-end processors such as that used in the BeagleBone that can natively support such RGB TTL displays. However, it is extremely rare for a small microcontroller to support it, as you need dedicated hardware or a very fast processor such as an FPGA. Not only that, but the backlight requires a constant-current mode boost converter that can go as high as 24V instead of our other small displays that can run the backlight off of 5V\u003c\/p\u003e\n\u003cp\u003eFor that reason, we are carrying it only as a companion to the Adafruit RA8875 driver board in the store, which is a chip that can handle the huge video RAM and timing requirements, all in the background. That's the best way to interface this display to just about any microcontroller (including Arduino \u0026amp; friends) If you are an advanced electronics enthusiast you can try wiring this directly to your processor, but we don't have any support or tutorials for that purpose.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eRevision History\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs of October 21, 2024,\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003ewe've changed TFT suppliers - the new TFT has the exact same functionality and dimensions. The colour and brightness are comparable or better.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 121mm x 76mm x 4.2mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDatasheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":52217208045856,"sku":"lhb1787257243775","price":19.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0946\/3231\/3120\/files\/50-40-pin-tft-display---800-x-480-with-touchscreen_1.jpg?v=1787257249"}],"url":"https:\/\/www.elmwoodbasket.shop\/collections\/lcds-displays.oembed","provider":"My Store","version":"1.0","type":"link"}